Outlook public calendar not updating
Outlook public calendar not updating - Freesexhookups no creditcard
Normally device updates are triggered after signing in to the Lync Server as described in detail in the previous article.But by adding the suggested configuration to a Lync 2013 server as outlined in this article then the issue can be avoided and devices can be updated as needed.
Windows, Mobility), the (LPE) client was not updated in the same manner.
This signals the intent to provide a single LPE client for both Lync platforms and not have separate 2010 or 2013 clients with different interfaces.
What this all means is that to utilize any Lync Phone Edition devices with Lync Server 2013 the phone firmware may need updated to at least the CU7 release, which is version 4.0.7577.4363 / .4366 / .4372 for different device families.
How can a device which cannot register to the server download an update from the server when it needs to first register to be provided the device update server information?
This might mean that the device would instead need to be connected to and registered to Lync 2010 server first, then updated to CU7 or higher, no? There is one alternative which would allow any previous version of Lync Phone Edition to download an update package directly from a Lync 2013 server without even the ability to first successfully register to it.
This article is a brief update to the process previously documented for Lync Server 2010.
In Lync Server 2013 the Device Update service is unchanged and the steps shown in that article are still applicable, so why the need for a new post on this subject?Attempts to use 1.0.522.x versions would always fail with As older versions of firmware may still be in use or come pre-installed on new devices then there may exist a scenario where the devices are unable to successfully sign-in to a Lync Server 2013 environment (specifically OCS 2007 RTM versions).And because the only way to update the Lync Phone Edition firmware is by the device requesting and downloading the package from the Lync Server then this appears to be a cyclic problem.Microsoft continues to release semi-quarterly Cumulative Updates of firmware for the various LPE models.In the round of releases in December 2012 and January 2013 (aka CU7) official support for Lync Server 2013 was added, as well dropping the ‘2010’ from the previous name of .This little-known behavior is hardcoded into all firmware releases.